联系
联系人:赵经理
咨询电话:15100252893
微信:15100252893
邮箱:jinbi_007@163.com
网址:www.syuan-lab.com
当前位置:麻绳抬缸结的结法
[来源:www.syuan-lab.com] [作者:567zx] [日期:18-10-23]

抬缸结用于抬缸或吊运圆形的物件,其打结方法分三步。 第一步,将绳的中部压在缸的底部,两个绳头分别从缸的两侧向上引出, 第二步,将绳头在缸的上部互相交叉绕一下,如图16(b)所示。 第三步,按图16(b)中箭头所示方向,将绳交叉的部分向缸的两侧分开,并套在缸的中上部[如图16(c)所示],然后将绳头拉紧,即成抬缸结。注意在将交叉部分向两侧分开套在缸上时一定要套在缸的中上部,这样由于缸的重心在中部绳套的下方,抬缸时缸就不会倾倒。 The lifting cylinder is used to lift the cylinder or lift the round object. The knot is divided into three steps. In the first step, the middle part of the rope is pressed on the bottom of the cylinder, and the two rope heads are lifted from the sides of the cylinder. The second step crossover the top of the rope on the top of the cylinder, as shown in Figure 16 (b). The third step, according to the direction shown in the arrow in Figure 16 (b), separate the cross part of the rope from the sides of the cylinder, and set it in the middle part of the cylinder [shown in FIG. 16 (c)], then tighten the rope head, that is to lift the cylinder knob. Attention must be placed in the upper and middle part of the cylinder when the cross part is separated from the two sides on the cylinder, so that the cylinder will not be dumped when the center of gravity of the cylinder is below the middle rope sleeve.

关键字:麻绳
网站制作及优化全程服务:遨游网络 版权所有河北尊皇麻绳制品厂
咨询电话:15100252893 微信:15100252893 邮箱:jinbi_007@163.com 网址:www.syuan-lab.com
河北尊皇麻绳制品厂推荐:麻绳、麻纱绳、剑麻绳、黄麻绳、黄麻绳型号、麻绳厂家、麻绳价格、麻绳批发
友链: 太阳能路灯 压膜线 加油站液位仪 不锈钢铸件 抹灰机 化粪池模具 钢纤维 保定网站建设 止血带 淤泥固化 粉墙机 电缆挂钩 光纤激光切割机

保定网站建设及优化保定遨游网络公司

http://www.czfia.com/bocaiwang/,http://www.czfia.com/ttyulecheng/娱乐城|博彩网|网上赌博|投注|888真人|网上赌博|云鼎娱乐城|新澳门娱乐城|百家乐|赌博|美高梅|伟易博娱乐城| 十三张娱乐城|伟易博||||博狗娱乐城|十三张娱乐城||十三张娱乐城|百家乐|太阳城娱乐城|足球投注|